Reasons To Work In Manufacturing News

January 12, 2017

Reasons To Work In Manufacturing

The manufacturing field is the heart of America’s economy as most firms drive the majority of our domestic corporate research…

moldeddimenstg

Love0

Creep & Stress Relaxation NewsRubberUrethane

November 17, 2016

Creep & Stress Relaxation

Creep When subjected to load, all elastomers exhibit an increasing deformation with time, know as creep. This occurs at any…

moldeddimenstg

Love0

October is Manufacturing Month! News

October 25, 2016

October is Manufacturing Month!

October is manufacturing month, and is a time to look back and see how far the industry and our company…

moldeddimenstg

Love0

Information About Durometers and Hardness NewsRubberUrethane

September 22, 2016

Information About Durometers and Hardness

Did you know that a durometer is the most commonly used instrument for measuring hardness? Give this blog a read…

moldeddimenstg

Love0

Static and Dynamic Load Deflection in Rubber NewsRubber

August 26, 2016

Static and Dynamic Load Deflection in Rubber

Primarily, rubber is used in place of metallic, ceramic, and other rigid materials because it will provide a greater deflection…

moldeddimenstg

Love0

EPDM, A Go-To Material NewsRubber

July 1, 2016

EPDM, A Go-To Material

EPDM (ethylene-propylene-diene) has many exceptional qualities making it a go-to elastomeric material.  EPDM is thermoset, meaning that it is cured…

moldeddimenstg

Love0

Factors Affecting Tolerance NewsRubber

June 14, 2016

Factors Affecting Tolerance

There are many factors involved in the manufacturing of molded rubber products which affect tolerances. In general, the degree of…

moldeddimenstg

Love0

Former UW-Eau Claire Student Gives Back NewsOur Team

April 12, 2016

Former UW-Eau Claire Student Gives Back

Tony Lukas, Chemist at Molded Dimensions Inc., visited UW-Eau Claire to share his work experience and perspective with the faculty…

moldeddimenstg

Love0

Defining Tensile Strength, Elongation, and Modulus for Rubber and Cast Polyurethane Materials NewsRubberUrethane

March 25, 2016

Defining Tensile Strength, Elongation, and Modulus for Rubber and Cast Polyurethane Materials

Tensile strength, elongation, and modulus are often used as qualification criteria when specifying rubber and polyurethane material.  They can also…

moldeddimenstg

Love0

Be Educated About PPE NewsOur Team

March 11, 2016

Be Educated About PPE

First of all, what is PPE?  Personal Protection Equipment, otherwise known as PPE, is used to control physical and health…

moldeddimenstg

Love0

Basic Skills Needed for a Manufacturing Career News

February 26, 2016

Basic Skills Needed for a Manufacturing Career

A career as a manufacturing, production employee is not only rewarding, but can lead to many opportunities such as supervisory…

moldeddimenstg

Love0

Silicone Products Can Be Found All Around Us NewsRubber

January 27, 2016

Silicone Products Can Be Found All Around Us

Silicone rubber is an elastomer that combines silicon, carbon, hydrogen, and oxygen.  It is a material that maintains its properties…

moldeddimenstg

Love0

Polyurethane Has Many Unique and Desirable Properties as a Thermoset Elastomer NewsUrethane

January 15, 2016

Polyurethane Has Many Unique and Desirable Properties as a Thermoset Elastomer

Written By: Tony Lukas Material Properties Millable urethane rubber is available in hardnesses ranging from approximately 30A-90A.  While castable urethanes…

moldeddimenstg

Love0

GlocalSource, Ensuring Quality Global ManufacturingNews

December 21, 2015

GlocalSource, Ensuring Quality

Our GlocalSource division provides rubber product from worldwide sources.  These sources are visited and handpicked from dozens of factories by…

moldeddimenstg

Love0

Design For Manufacturability: Rubber and Cast Polyurethane Raw Material Selection NewsRubber

December 14, 2015

Design For Manufacturability: Rubber and Cast Polyurethane Raw Material Selection

One of the most important items in the design for manufacturability process is selecting the lowest cost rubber or urethane…

moldeddimenstg

Love0

A Translucent Silicone for Conventional Molding Methods NewsRubber

December 2, 2015

A Translucent Silicone for Conventional Molding Methods

Conventional molders, such as Molded Dimensions, Inc., are currently able to process a translucent, high strength, FDA compliant, high consistency…

moldeddimenstg

Love0

How To Influence Base Material Cost on Molded Rubber Parts NewsRubber

November 11, 2015

How To Influence Base Material Cost on Molded Rubber Parts

How to influence base material cost on molded rubber parts Buyers and engineers are driven to reduce overall assembly cost…

moldeddimenstg

Love0

Flash. A Fancy Word For Edge Waste. NewsRubber

October 30, 2015

Flash. A Fancy Word For Edge Waste.

Rubber injection molds are designed for an efficient, cost effective molding process, including lowest possible cycle time, maximized cavity count, and…

moldeddimenstg

Love0